Categories > Pipe sealing through metal walls

Pipe Sealing Through Metal Tank Walls

GP-G Thin wall seals; metal, plastic - Flat Walls or Curved Walls

Metal Tank Wall sleeves and seals examples.

 

metal-tank-wall-disk-sealpipe-throught-metal-wall-seal

 

 

 

 

 

 

External thread seal and pipe connectiom

metal-tank-wall-pipe-penetration-seal

metal-tank-pipe-through-wall-seals

If a thimble sleeve is used the seal selection will be the same.

 
 
 
 

Internal thread attachment seal

pipe-conduit-through-metal-wall-seals

Metal tank wall pipe penetration assembles may have back plate flanges for flat or curved tank walls.

The pipe outside diameter will determine the size of the sleeve and seal.

The assemble may be bolted, back nut fastened or in some cases welded.

Once the customers application is detailed, the assemble will be built for the project with varying penetration diameters for the pipe sizes.

In the case of disk-seals the sealing element will be determined by the tank medium; e.g. EPDM, NBR, Silicone etc. NBR for hydrocarbon fluids, EPDM for water & some chemical, Silicone for higher temperature fluids.

Pipe through Deck Plate or Metal Wall seal with flange connection for pipe extension.

metal-tank-pipe-penetration-seal

flange-pipe-seal-tank-wall


Bolted Sleeve Assemble. GPC Model Stainless steel

GP-C sleeves are bolted to a steel tank wall or other steel structure and sealed at the attachment flange with a flange gasket. The pipe or conduit passing through the sleeve, is sealed with a Disk-Seal. The Disk grommet seal is a split model, for easy mounting around the pipe. Disk-Seals may be configured for more than one pipe passing the same wall sleeve.

The back plate may ordered in a curved configuration to accommodate a round tank wall.

GPC metal wall sleeve.

metal-wall-penetration-sleevesConduit-seal-cable-pipe-through-metal

 

 

 

 

  • Ship Deck Sleeves for conduit passage.
  • Pipe or Conduit passage through metal plate walls.
  • Sleeves for metal tanks.
  • Back plate seal and Disk-Element Seal. (EDPM, NBR, Silicone.)
  • Pipe diameter range: 50 - 150 mm
  • Sleeves and Disk seals may be supplied in the split model for existing pipes.

 

Contact us: Westatlantic Tech Corp, 902 455 4455

Back to all products page

 

Westatlantic Tech Corp., Consulting Sales USA and Canada for tank wall seals, connector sleeves, pipe seals. Canadian Regions and City availability; In Alberta, AB; Edmonton, Fort McMurray Calgary. British Colombia, BC; Kelowna, Vancouver, Prince Rupert, Kitimat. Saskatchewan, SK; Regina, Saskatoon, Prince Albert, Esrevan, Swift Current. Manitoba MB; Winnipeg, Thompson. Ontario, ON; Toronto, London, Ottawa, Hamilton, Quebec, QC; Montreal, Quebec City, Trois-Rieviers, Chebougamau, Sherbrooke. New Brunswick, NB, Nova Scotia, Newfoundland Labrador, NL.